Seat Ateca Boot configuration

New to the Seat Ateca Forums? Introduce yourself here
Post Reply
psreekanthuk
Posts: 4
Joined: Thu Oct 12, 2017 2:25 pm

Seat Ateca Boot configuration

Post by psreekanthuk » Thu Oct 12, 2017 2:53 pm

Hi All,

New owner of Seat Ateca Xecellence Diesel automatic. Already drove 1000+ miles in two weeks.

just had a query, Mine did not come with variable boot load plastic thingy which is needed for boot shelf to be on upper level.

how and where can i purchase them? i tried local dealer with no luck.

they just said it can only be factory fitted, which i do not believe for one bit.
Seat ATECA Xcellence, 2 ltr Diesel Automatic


AlasdairMac
Posts: 25
Joined: Sat Sep 30, 2017 3:55 pm
Location: West Lothian

Re: Seat Ateca Boot configuration

Post by AlasdairMac » Thu Oct 12, 2017 5:36 pm

I got the same answer as I want to hide my space saver spare (not Seat supplied one) under it. Toying with making a template and cutting one from a sheet of ply.
Ateca 2.0 TDi 190 Xcellence DSG 4Drive Black.


Tim The Pines
Posts: 32
Joined: Mon Oct 24, 2016 6:47 pm

Re: Seat Ateca Boot configuration

Post by Tim The Pines » Thu Oct 12, 2017 5:47 pm

psreekanthuk wrote:
Thu Oct 12, 2017 2:53 pm
Hi All,

New owner of Seat Ateca Xecellence Diesel automatic. Already drove 1000+ miles in two weeks.

just had a query, Mine did not come with variable boot load plastic thingy which is needed for boot shelf to be on upper level.

how and where can i purchase them? i tried local dealer with no luck.

they just said it can only be factory fitted, which i do not believe for one bit.
Your dealers are talking rubbish.
My dealers cocked up my order and my car was delivered without the double floor,
It was fitted a couple of days later

Tim
Ateca Xcellence 1.4 TSI, Mato Brown, Park Assist, Double Floor


Etchings
Posts: 588
Joined: Tue Mar 21, 2017 7:45 pm
Location: Surrey

Re: Seat Ateca Boot configuration

Post by Etchings » Thu Oct 12, 2017 8:52 pm

Double floor is factory fit option and there's no after-sales order option. However dealers could order individual parts and construct it; just requires 'effort' on their part.
Now driving: Ateca XCellence 1.4 TSi in Rodium Grey with XCellence + Advanced Driving Assistance Packs, Double Boot Floor + Space Saver Spare - Ordered week 9, confirmed built week 26&27&28, arrived in UK week 30 - Collected 1st Sept 8-)


psreekanthuk
Posts: 4
Joined: Thu Oct 12, 2017 2:25 pm

Re: Seat Ateca Boot configuration

Post by psreekanthuk » Fri Oct 13, 2017 5:20 am

AlasdairMac wrote:
Thu Oct 12, 2017 5:36 pm
I got the same answer as I want to hide my space saver spare (not Seat supplied one) under it. Toying with making a template and cutting one from a sheet of ply.
Please let us all know how it goes. Some photos would be nice.
Seat ATECA Xcellence, 2 ltr Diesel Automatic


psreekanthuk
Posts: 4
Joined: Thu Oct 12, 2017 2:25 pm

Re: Seat Ateca Boot configuration

Post by psreekanthuk » Fri Oct 13, 2017 5:28 am

Etchings wrote:
Thu Oct 12, 2017 8:52 pm
Double floor is factory fit option and there's no after-sales order option. However dealers could order individual parts and construct it; just requires 'effort' on their part.
thanks Etchings, Local dealers parts department are absolutely useless. Where can i get part numbers?
Seat ATECA Xcellence, 2 ltr Diesel Automatic


Etchings
Posts: 588
Joined: Tue Mar 21, 2017 7:45 pm
Location: Surrey

Re: Seat Ateca Boot configuration

Post by Etchings » Fri Oct 13, 2017 4:46 pm

Dargas had it done so probably worth a PM to see if he managed to find the part numbers on his invoice.

Take a look at this thread: viewtopic.php?f=8&t=1390
And this thread: viewtopic.php?f=8&t=1540

Essentially your dealer has to look for the floor panel itself and the side panels too (whole side of inside trim as the eyelets are a different height, not just the plastic mouldings). Thinking about it for a moment (and this could be your line with the dealers) SEAT will have to have spare part numbers in case they need to replace bits under warranty etc. in the future.

The dealer will probably have to look up the part codes individually in the workshop manuals (you could try yourself if you can access Erwin - the VW electronic library for workshops) and that's most likely why they aren't interested in helping you.
Now driving: Ateca XCellence 1.4 TSi in Rodium Grey with XCellence + Advanced Driving Assistance Packs, Double Boot Floor + Space Saver Spare - Ordered week 9, confirmed built week 26&27&28, arrived in UK week 30 - Collected 1st Sept 8-)


Graham B
Posts: 48
Joined: Sun Jun 25, 2017 2:11 pm
Location: Kent UK

Re: Seat Ateca Boot configuration

Post by Graham B » Sat Oct 14, 2017 8:14 am

What is this Double Floor? I didn't order one but mine came with a panel that fits 2 ways, one flat and one lower that slopes up at the front. I ordered the "Pet Pack" but had to fit it myself. Saved £70 + VAT to order as a pack. Perhaps it comes with that or I just got lucky
Ordered 1.4 TSI Xcellence with heated front screen and panoramic sun roof in Rodium Grey. DELIVERED 12 SEPT FINALLY


SheepyGooner
Posts: 33
Joined: Wed May 31, 2017 10:58 pm

Re: Seat Ateca Boot configuration

Post by SheepyGooner » Sat Oct 14, 2017 9:31 am

That is essentially it Graham, the double floor is the ability have it on two levels, a flat load and then a slightly deeper load
Graham B wrote:
Sat Oct 14, 2017 8:14 am
What is this Double Floor? I didn't order one but mine came with a panel that fits 2 ways, one flat and one lower that slopes up at the front. I ordered the "Pet Pack" but had to fit it myself. Saved £70 + VAT to order as a pack. Perhaps it comes with that or I just got lucky
On Order 25/4/2017: 1.4 SE Tech ECO TSI, Rodium Grey, KESSY, Parking Assist Plus, Sound Pack, Convenience Pack, Double Boot. Expected 20-21 Weeks! Arrived 6/7/2017 :D


Post Reply

Return to “Introductions”


Who is online

Users browsing this forum: No registered users and 2 guests